How to Set Out a building on Site

Setting out is the first stage of construction in a site. This involves outlining the structure on the ground. For any new house or extensions or alterations mapping out is very leading to avoid precious errors. There are factors to think when laying out the construction plans on site. This comprise the size of the plot, neighbors, driveways and sun direction. The other factors to note are planning requirements by the local authorities and services required to the site. This are electricity, water, sewers, transportation and roads.

When setting out the construction on the ground think the angle to plot boundary line. The house should be offset from the boundary line by at least twenty to forty degrees. A construction set parallel to boundary line has a small optical plot size. This offset also gives best usable spaces in the front and backyards. It will also make the sun run through the house east to west giving warmth to the whole house. Set house north to south for maximum sun.

Modular Home Floor Plans California

Setting out commences from a plot angle and putting a peg. Offset the peg by four meters at an angle of twenty degrees from plot end. Quantum out the distance of the construction along this angle and place a peg. Mark the width along ninety degrees from this and faultless to first peg. With the four corners in place, map out the are with chalk powder. Use the drawing to locate the extent of the construction line within the mapped area and mark corners.

The setting out should go forward by manufacture profile boards. This are timber or metal boards set off the construction line. They indicate the foundation width and wall thickness. Pull strings along this marks to draw the foundation lines for the whole house. Mark a center line for each wall. Use this to map to the whole house on the ground. Confirm the squareness and all the dimensions at every intersection. After confirming all dimensions work can commence.

How to Set Out a building on Site